HOME > Product > High Power Wireless > CPE Series > ARG-2630, CPE2630

Quantity:
Picture of CPE Series for ARG-2630, CPE2630
Item No. ARG-CPE 2630a/b/g/n
Product Name CPE-2630a/b/g/n (Long Distance Wireless LAN Outdoor Integrated Solution)
View More Details
CPE 2630 Specification (131 KB)
Quick Installation Guide (276 KB)

Description

W-LAN Outdoor Application(all in one): 15dBi dual Patch Antenna & Attached Plastic Housing + 802.11a/b/g/n AP PCBA

ARG CPE2630a/b/g/n CPE which fully supports the features and functional compliance of IEEE 802.11a/b/g/n and IEEE 802.11a/b/g/n standards and operate in 2.4/5.8GHz bands. It enables the deployment the latest updated QoSVWMM, WMM-PS ,support MIMO, connectivity at high throughput from an extended distance and giving end users the greatest performance

Features

  • Operates on 2.4 GHz and 5.8GHz frequency band including 11n mode 1T2R MIMO technology for enhanced throughput up to 300Mbps
  • Backward compatible with legacy IEEE 802.11g, 802.11b (2.4GHz) ,and 802.11a(5.8GHz) standards
  • High power with integrated 12dBi 802.11b/g, 14dBi 802.11a antenna
  • Configuration and management operated via Web browser with password protected access
  • Firmware upgrade via HTTP
  • Supports Gateway, Bridge, and WISP mode for wireless networks
  • Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x)
  • Support NAT, SPI (Stateful Packet Inspection) for advanced firewall features
  • Compliant with IEEE 802.3 and IEEE 802.3u 10/100 Mbps
  • Supports WMM function to meet the multimedia data bandwidth requirement
  • Power supply by 12V, 1.25A / 1.5A PoE DC injector over Ethernet

Specification

Standards IEEE 802.1d (Spanning tree Protocol)
IEEE 802.11b (11 Mbps Wireless LAN)
IEEE 802.11g (54 Mbps Wireless LAN)
IEEE 802.11a (54 Mbps Wireless LAN)
IEEE 802.11n Draft 2.0 (300 Mbps Wireless LAN)
IEEE 802.1x (Network Access Control)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
General Ethernet port: 2 RJ45 10/100 Mbps data port; one WAN and one LAN interface
2 power input Ethernet port, WAN and LAN
Flash: 4 MB
Memory: 16 MB SDRAM
Wireless Wireless Frequency Range:
-2.400 - 2.483 GHz and 5.15-5.85GHz
Modulation Technologies:
- 802.11b: Direct sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK
- 802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
- 802.11a: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
- 802.11n: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
Data Rates:
- IEEE 802.11b (11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps)
- IEEE 802.11g (54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps)
- IEEE 802.11a (54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps)
- IEEE 802.11n (up to 300 Mbps)
Output Power:
- 802.11 n: 23 dBm ± 1.5 dBm (300Mbps)
- 802.11a: 18dBm ± 2dBm (54Mbps)
- 802.11g: 23 dBm ± 1.5 dBm (54 Mbps)
- 802.11b: 28 dBm ± 1 dBm (11 Mbps)
Receiver Sensitivity:
  - 11n (300 Mbps): -73 dBm
- 11a (54Mbps) CCK: -73dBm
- 11g (54 Mbps) OFDM: -73 dBm
- 11b (11 Mbps) CCK: -91 dBm
Operation Modes:
- Gateway mode
- Bridge mode
- WISP mode
- AP Client mode
Wireless Security:
- WEP encryption (64/128 bit)
- WPA TKIP
- WPA2 AES
- WPA2 mixed
- 802.1x Authentication
- Client access control through media access control (MAC) filter
Antennas:
- 12dBi panel antenna for 802.11 b/g/n
- 14dBi patch antenna for 802.11 a/n
- On board printed antenna
- Polarization: linear vertical

Package Contents

- Wireless CPE CPE2630
- User manual, quick install guide on CD
- Power adapter 12V 1.25A / 1.5A
- PoE DC Injector

Demo